KDGF-25B tube filling and sealing machine A. This equipment is widely used in industry of toothpaste, cosmetic, drugs and food etc., it is applicable for various plastic tube and plastic-laminated-tube. It can fill-pack all kinds of cream, latex, lotion, oil and water etc. Before you use our equipment, read this user manual carefully, so that you can make a good use of our products. This equipment can automatically fill, seal, stamp batch numbers and exit tubes(with 8 tube position) . Inner-heating and outside heating method is adopted in the heating section, which can blow hot-wind to the tube tail-ends inner wall. The parts touched with material adopt 304 stainless steel, which can proof acid, alkali and corrosion. All the channels can be unloaded fast and agilely. The material-valve can be rotated, it can be cleanout easily, so theres no place for the dirty. Fixing organization can fix position precisely and firmly. The position-turning part can change speed by using different-frequency. Customers can adjust the working speed themselves. Several devices such as heatproof system( to keep steady heating temp. of the material) , mixing parts, and etc can be chosen according to the customers demand.II. Basic parameters of the machine1.Power supply: 220V±10% 2.Consume 350W×2 250W×2 3.Air source(Mpa):air pressure 0.4Mpa 4.Filling capacity(ml): 50100200250ml as per customer demand 5.Speed: 20-30 pcs/min 6.Measure precision: ±1% 7.Dimensionmm: 1100*800*1600(net) 8.Weight of the machine (kg)280